Table Of Contents
In this post, we’ll provide 6+ fixes (and video guides) for 0x80070422 errors.
Sometimes, when you try to install a Windows Store application, you’ll encounter an installation problem which is accompanied by a (0x80070422) error code. Fortunately, it’s an error code that’s relatively easy to fix, although you’ll need to find the cause of the problem first.
In this article, we’ll guide you through the possible fixes you can perform to fix the error and pinpoint any of its possible cause.
LOL! Second day with Windows – The Vundo to be associated with the 1058 error 0x80070422
— Héctor López (@hectoromhe) February 19, 2009
Fresh install of Windows 10 1703…throwing this error: 0x80070422 store apps and WU wont download..any ideas?
— Brad Sams (@bdsams) October 23, 2017
Thanks Microsoft! Who wouldn't immediately know that error 0x80070422 means the service is disabled?
— Carolyn Jewel (@cjewel) February 3, 2016
What is the 0x80070422 Error Code?
The 0x80070422 error code is just one of the many errors you’ll encounter on various Windows versions including Windows 7, 8, 8.1, and 10. This Windows-based error code tends to appear when you try to update your Windows system or when you install an application from the Windows Store.
However, it could also be due to the following causes:
- Corrupted or missing DLL and registry files
- Outdated drivers
- Administrative issues
- Software installation which is infected by malware or virus
How to Fix the 0x80070422 Error
Video Guide: How To Fix Windows Update Error 0x80070422 In Windows 10
As mentioned earlier, it’s relatively easy to fix this error, although the fixes will vary depending on your current operating system. Here are some of the quick fixes you might want to try:
1st Fix: Configure the Update Service
If the possible cause for this error is your system’s Update Service, you can simply fix it by allowing the service to automatically start upon boot. Here’s a step-by-step guide as outlined by Appuals:
- Open your Run window by pressing both the Windows key and R at the same time.
- In the Run window, type services.msc then press Enter. This will open the Services window.
- In the right pane, scroll down then navigate to the Windows Update option. Double click it to open the Properties window.
- In the Startup type section, choose Automatic.
- Click Apply, then Okay.
- Close the Services window then restart your computer.
After that, visit the Windows Store and install an application which has experienced the error before. If the problem still persists, move on to the next fix.
Video Guide: How To Turn Windows Update Service On Or Off In Windows 10/8/7
2nd Fix: Install the Latest Updates
Sometimes, error 0x80070422 appears when you turn on your firewall. To fix that, Microsoft Support suggests you install the latest updates. Here’s how:
- Head to the Windows Update settings by clicking the Start button then typing “Windows Update”.
- In the Windows Update window, click the “Check for updates” section.
- If there are new updates detected, click Install Updates. In some cases, you’ll have to restart your computer for the changes to take effect.
- After that, click the Start button then type Control Panel.
- In the Control Panel window, click on Windows Firewall.
- In the left sidebar, click on Turn Windows Defender Firewall on or off.
- Select the Turn on Windows Defender Firewall on both Public and Private settings. Click OK afterward.
This method should fix the 0x80070422 error which appeared when turning on the firewall. However, in some instances, you’ll have to refer to the following fix.
Video Guide: How to Download Windows Updates Manually
3rd Fix: Disable IPv6
According to some users, they were able to fix the issue by simply disabling IPv6. In case you’re wondering, IPv6 (Internet Protocol version 6) is regarded as the latest version of the IP (Internet Protocol). It was intended to deal with the running problem regarding the IPv4 address exhaustion. By disabling it, you just might fix the 0x80070422 error. Here are the steps you should follow as outlined by Error Tools:
- Go to the Control Panel by clicking Start button then typing Control Panel.
- In the Control Panel, look for Network and Sharing Center.
- Under the “View your active networks section”, click on your internet connection. This is named Ethernet by default.
- A small Ethernet Status window will pop up.
- Click on Properties, then scroll down from the list of options.
- Look for Internet Protocol version 6 (TCP/IPv6) then uncheck the checkbox right next to it.
- Click OK then restart your computer.
- Check if the error has been fixed after boot.
Video Guide: How To Disable IPv6 On Windows 10
4th Fix: Restart Network List Service
Another possible fix is to restart the Network List Service which, according to a few users, resolved the problem for them. Windows Report detailed the process which involves the following steps:
- Press Windows key + R to open the Run window.
- In the Run window, type services.msc then press Enter. This will launch the Services setting.
- In the list, look for Network List Service.
- Once you found it, simply right click on it then choose Restart. Alternatively, you can click Stop then Restart.
- After that, try to update your computer and check if the error is no longer there.
Video Guide: Windows 10: How To Start Or Stop Network List Service
5th Fix: Perform a System Restore
Sometimes, a System Restore is all you need to fix the problem. If you’re not familiar with this feature, it’s actually quite useful to revert your system to an earlier state in which the issue hasn’t happened yet. It’s actually pretty simple, and Windows Report teaches us how:
- Press both Windows key and S at the same time. Next, choose the Create a restore point option. This will open the System Properties window.
- Once there, click the System Restore button. Click Next right after.
- You might want to check the Show more restore points option for more available restore points.
- Simply choose your desired restore point then click Next.
- Wait for your computer to complete the process. It will automatically restart after that.
- Check if the problem is no longer there.
Video Guide: How To Perform A System Restore
6th Fix: Scan for Malware
If you’ve done all of the above fixes but to no avail, then it could mean a potential malware infection. For this, you’ll have to perform a malware scan as suggested by Windows Report.
To do this, you will have to use an antivirus tool such as Panda Antivirus or BitDefender. You can also use Microsoft’s Malware scanner for that.
Video Guide: How To Scan And Remove Malware, Virus And Spyware In Windows 10 Using Inbuild MRT
To understand more about the 0x80070422 error and how users dealt with it, we searched through different discussion and message boards and Microsoft support forums. In general, people wanted to know what 0x80070422 was and how to fix 0x80070422. They also were interested in 0x80070422 Windows update.
Enable Automatic Updates
A computer owner complained that he couldn’t update his Windows fully, because he was getting an error 0x80070422.
- He decided to wait and see if the problem wouldn’t fix on its own, but after five days he continued to get the same message: There were some problems installing updates, but we’ll try again later. If you keep seeing this and want to search the web or contact support for information, this may help: (0x80070422).
- So, he asked for advice on a Microsoft forum, and they advised him to restart Windows Update by going to Control Panel > Administrative Tools > Services à Windows Update.
- Then you should right-click and select Properties > General > Automatic and then Service Status and click on Start.
- The user reported that Windows Update was disabled, so turning it to automatic allowed him to install the new updates.
Do A Reboot
Another forum member suggested that you reboot your computer several times in a row because that sometimes would work for him. Otherwise, he recommended that you start the device in a clean boot in case a program was interfering with the updates.
Set Windows Search To Manual
An individual also reported that he had a lot of problems with Windows update and error 0x80070422. However, he noticed that Windows Search was disabled and when he set it to manual, all the hanging updates started processing.
A computer owner pointed out that if you can’t restart Windows Update Services, you probably don’t have the authorization to do so. That’s why you have to run the system as an administrator and then try again. However, a couple of users reported that the system wouldn’t allow them to make changes even as administrators and that they were stuck.
Use Windows Update Troubleshooter
Another individual mentioned that you could try downloading and running the Windows Update Troubleshooter and see if it would detect the problem when you run it. In addition to this, he suggested that you download the most recent Servicing Stack Update from the official Microsoft catalog.
Get A Microsoft Update
A person also said that when you experience problems with the 0x80070422 error, you should download the latest update from the official Microsoft page. You can find which update was last by going to your Update history and looking up the name of the top one. Then download it and open it to start the update.
Damaged Or Corrupted Files
Another individual said that if you continue to get problems with Windows update, then you should scan your computer for damaged or corrupted files because they might be interfering with the updates. To do that you have to run the command prompt as an administrator and type:
- DISM.exe /Online /Cleanup-image /Restorehealth
- sfc /scannow
When the command prompt finishes, you should close it, and try to install your update again. The user reported that it fixed his problem and the 0x80070422 disappeared.
Another forum member explains that 422 in 0x80070422 means service disabled so you might have accidentally disabled Background Intelligence transfer service (BITS).
- BITS is responsible for downloading Windows update, and that’s why you’re not able to install updates completely.
- The solution that works in almost all cases is restarting Windows Updates by going to Service Status and clicking on Start.
However, another forum member has a different solution. He points out that you might not have to search for Service Status in Windows Update. Instead, you should press Windows key plus R and type into the box services.msc. Then you find the services responsible for Windows Update, and you right-click on them to select Start.
A computer expert states that as a last resort, you can use Windows Media Creation Tool to perform an in-place upgrade. However, he warns that it might be too complicated for a person not familiar with how Windows Media Creation works.
Enabling the Windows Module Installer Service
Another individual shared that what worked for him to get rid of the 0x80070422 error and install updates was enabling the Windows Module Installer Service.
On the other hand, some other users complained that nothing they did would fix the problem and they were forced to perform a clean install of Windows 10. They mention that it might be related to the free update to Windows 10, which was offered a few years back.
The 0x80070422 error is a relatively easy error to fix but can be annoying if left unattended. By following the said fixes, you’ll be able to resolve it without any problems at all. However, if it still persists even after all that, you’re better off calling for a technician to perform more advanced repairs.
Ryan is a computer enthusiast who has a knack for fixing difficult and technical software problems. Whether you’re having issues with Windows, Safari, Chrome or even an HP printer, Ryan helps out by figuring out easy solutions to common error codes.